Diese
Protective Film for Table Tennis Rubbers differs from conventional rubber protective films due to its slightly adhesive effect.
After cleaning the table tennis rubbers (they must be completely dry), the
rubber protective film is placed on the rubbers. Due to the slightly adhesive effect, it has optimal hold on the rubber. Additionally, a slightly sticky layer forms on the rubber, making it feel grippier than before.
This rubber protective film is recommended for
use on table tennis rubbers with non-sticky surfaces. The delivery includes one film, which is intended for one rubber only. Made from PVC material, it is very high quality and promises long durability.
The individual cleaning steps are as follows:
- Remove dust and sweat from the rubber surface and allow it to dry completely
- Apply the self-adhesive film at the bottom end and slowly apply it bubble-free
- Trim the excess rubber protective film flush with the table tennis racket
If the adhesive effect diminishes (this is normal after a few weeks), the film can be carefully cleaned with a damp cloth. After complete drying, it is
fully usable again.
Here are some usage notes. The film should
preferably not be folded and should not be placed near fire. The rubber protective film measures 175x175 mm.
There are two types of rubber protective films:
- self-adhesive rubber protective film : Suitable for "normal" table tennis rubbers with inverted pips
- self-adhesive rubber protective film : Suitable for rubbers with sticky or slightly sticky surfaces